Water heater to Your pool

On a hot summer that the water in a small state pool is heated obviously. When the weather is heat time is prolonged or, generally, the temperature does not achieve a comfortable temperature of +22oC. In massive pools natural heating takes much longer. To address this problem, made a heater to the pool, working out of different energy resources.

Heat exchanger

The simplest water heater for the swimming pool is an heat exchanger. The basis of the design is really a tank, through which the warm liquid flows. It’s connected to the heating system or any heating water heater. Within the tank is a built-in coil. This component is the heat exchanger. Pool water slides through the coil, heating against the liquid inside the tank.

Why do you want such a complicated pool heater if you’re able to just run on the water directly through the heater? You can use such a scheme, however there are two problems:

If warmed, they settle to the walls of the heat exchanger as a good sludge, clogging it.

  • Pool water is saturated in oxygen, which divides the metal walls of the heat exchanger.
  • To pricey boiler or flow heater doesn’t fail, the heating system is equipped with another loop. The heat exchanger is easier and cheaper to change if it becomes clogged or leaks from oxidation of the walls.

    Self-made heat exchanger – a coil of pipes on the heating system. In a tiny children’s pool piping has been set on the principle of the system”underfloor heating system”. A small amount of water the coil will warm fast, and with a large volume will not cope. Electric versions

    The 2nd most popular is an electrical heater for your pool, composed of a body, heating elements along with a thermostat. Devices come in two types:

    The device consists of a huge tank, where the water is warmed from the heating components, and from that point it’s fed into remonttool.ru the pool.

  • Flow-through. The device is connected to the water treatment method of their pool. There is a filter in front of the water heater, which passes purified water, which eliminates the creation of solid deposits.
  • Based on the capacity, the devices are connected to single-phase and systems that are interpersonal.
  • The need to warm a great quantity of water requires the usage of strong devices. Electricity costs are enormous, plus you have to put another field of wiring. Heating pump

    Rather complicated from the unit of this heater to the pool heat pump describes innovative technology. The device is efficient and cost-effective, however it’s rarely used due to its high cost.

    Significant: The heat pump operates on the principle of the fridge, only here the circuit that releases heat, not cold, is in demand.

    The machine is made up of two circuits, in which the fluid circulates. The outer pipe can be placed underground, at the bottom of the window or alternative area where you can extract the heat. The inner circuit is put inside the pool. It supplies the water that the heat extracted from the outer tube.

    Comments are closed.